The Zeez Design Racing LED Combo comes with the Zeez F7 FC and the Zeez LED System. This combo features one of the smallest RBG strips for racing drones on the market and is fully controllable from the FC firmware (BetaFlight or INAV).
Specifications
Zeez F7 Betaflight FC
Up to 8S input (max 36V)
5V BEC up to 3A continuous
STM32F722 MCU
MPU6000 Gyro/ACC for smooth performance
128MB OnBoard flash
OSD chip Onboard
6 available UARTS
VTX switch to control the ON/OFF of the VTX
directly from your transmitter
LC Filter for 5V VTX
USB Type C connector
Onboard RGB LED distribution for clean wiring to the LED on the arm of the quad.
Notch design on sides and in the front of the – FC for better fitting on the frame.
User Manual
BetaFlight 4.1 Firmware
Betaflight OSD Custom Logo
Zeez LED System
Zeez Led System includes 4 strips of RGB led light
10 RBG Led on each strip
Max Current Draw (10 led on white color): 0.6A @ 5V
Easy wiring to Zeez F7 Flight controller and easy control with BetaFlight
Dimension 35mmx7.5mm (the smallest RBG strip for racing drone on the market)
Includes
1 x Zeez F7 Flight Controller
1 x Zeez Led System (4 led Strip)
4 x Aluminum Standoff
4 x Aluminum Nut
2 x ESC to Flight Controller 8 Pin JST SH 1.00mm connector
6 x Led Strip to Flight Controller 3 pin JST SH 1.00mm connector
2 x 470uF 35V Low ESR Capacitor
2 x 2.00mm Header Pin for VTX connection
2 x 2.54mm Header Pin for Receiver connection
2 x Spare M3 rubber anti-vibration for Flight Controller or ESC