The TCMMRC Flight Controller Stack is a very powerful FC stack that is made to meet your FPV needs, whether you're are a pro pilot or not. The overall layout of this integral stack is made to easily disassembly and assembly making this stack very convenient for the pilots. This stack also features an innovative modular design that contains modules that can be easily replaced independently and can be matched freely and have powerful functions. The 100A current model and an F7 processor meet the needs of pilots of different levels. Reserve the receiver installation position, the receiver is no longer jammed Onboard microphone, the sound is immersive
Make your FPV experience a fun one with this FC Stack!
- Single-panel design, with ESC pin pads on the back which greatly reduces the problem of soldering short-circuits when soldering wires.
- Onboard barometer and a black box. Reserved compass, GPS interface.
- Up to 5 serial ports and 8 DShot output ports.
- The flight controller reserves SH1.0 sockets and pads to meet both the requirements of free soldering operation and DIY soldering.
- TYPE-C interface which can support larger current and convenient for pilots' operating experience.
- On-board 10V and 5V BEC (input voltage 2-6S) provide a clearer image display effect for image transmission.
100A 4IN1 ESC
- Innovative structural design in the industry: the power board is separated from the control board. This design allows pilots to only replace the power board and minimize the error when replacing.
- Two current models, 100A and a 60A, to meet the needs of different levels of pilots.
- The layout of the control board adopts the principle of symmetrical aesthetics.
- Uses a 4Oz copper thickness that balances beauty and performance.
- All wireless modules are placed on one board, which is more reasonable.
- Reserve the receiver installation position so the receiver will no longer be jammed in hard to reach places.
- 800mW image transmission, more user-friendly LED indication mode, clear at a glance.
- Onboard microphone with immersive sound for an overall better FPV experience.
- Copper skin can increase heat dissipation efficiency, avoid excessively high temperatures during work, and improve the stability of the board's working ability.
- There is a 1mm wide slot between the image transmission power board and the receiver to shield the signal and prevent emf interference.
- 1 x TCMM-RC Transformers Flight Controller Stack