Orders ship from the U.S.

SpeedyBee Adapter 2 Micro USB w/ WiFi
SpeedyBee Adapter 2 Micro USB w/ WiFi
SpeedyBee Adapter 2 Micro USB w/ WiFi
SpeedyBee Adapter 2 Micro USB w/ WiFi

SpeedyBee Adapter 2 Micro USB w/ WiFi

Regular price
Sold out
Sale price
$27.99
Shipping calculated at checkout.

The SpeedyBee Adapter 2 is a full-featured BF/INAV/emu configurator that comes with built-in WiFi. SpeedyBee put a WiFi chip in Adapter 2 which greatly improves the transmission speed and makes it possible to upgrade your flight controllers. The whole upgrading process costs only 2-3 minutes. Just cab go to a field and fly without carrying a heavy laptop. Note: The firmware flashing currently supports Betaflight/Emuflightvia WiFi connection to the Adapter 2 Power the whole thing with one battery Soldering work should be done on the user end on the previous generation. But the Adapter 2 now has built-in XT60 and PH2.0 connectors which both support 1-6S LiPo batteries input*. As the Adapter 2 can power your flight controller, you don't need another battery to power your quad. *For 1S batteries, 3.8V or above is required. Because some(very few) quadcopters may consume a lot of currents, and the output voltage of the adapter 2 will be greatly reduced. One Adapter 2 for all of your quads! With one Adapter 2, you could connect to all of your quads running Betaflight or iNav. Say goodbye to OTG problems Some Android phones don't support OTG or can't supply sufficient power to your flight controllers... But with Adapter 2, just say goodbye to all these problems. The lanyard-style cable is easy to store The liquid silicone cable is with two same micro USB ports on both ends. The connection is tight enough to prevent the cable from being lost. The lanyard-style cable can even easily carry 500 grams. Connection Tips 'TO FC' stands for 'unplug the USB cable from this end, then plug the cable into your flight controller'. Features Betaflight configurator in your pocket Upgrade FC firmware via Speedy Bee App Full-featured BF/iNav configuration Power via 1-6S XT60 and PH2.0 Batteries Built-in WiFi  Specifications Power Input Voltage Range: 1-6S(3.8V+ for 1S) Power Input Interface: XT60-Male, PH2.0 male Case Material: Heat-shrink Tubing Liquid Silicone Cable Length: (Pure Wire) 10cm Net Weight: 21.8g WiFi Transmission Distance: 3 meters Standby Working Current: Under 5V 120mA Maximum Output Current: 200mA @5V Dimension(Main Body): 18*18.5*42mm Manual Includes 1 x SpeedyBee Adapter 2 Micro USB w/ WiFi 1 x Manual