The Hydrophobe is a 255mm water-resistant 5" cine quad with a 2mm aluminum mid plate that doubles as a heat sink for your ESC and VTX. It has a 3mm bottom carbon plate, 6mm arms, and 1.5 mm top plate. A TPU skirt keeps rain, snow, and dirt out.
You can also augment it with sealant to make it as waterproof as possible.
Note: Camera, Battery, Floats, and Electronics NOT included.
Disclaimer: This frame does not claim to be waterproof, but water-resistant.
Features
- Equipped with an extra-long strap to wrap around the entire frame when mounting the battery.
- Arms are equipped with mounting points for floats.
- The DJI skirt has antenna holders.
- Aluminum Heat Sink Plate
- Waterproof
Build Tips:
- Avoid the use of a short strap looped around the outside of the tabs, that part is not meant for that amount of stress.
- Use a non-conductive thermal paste to transfer heat, but don't let bare boards directly contact the aluminum.
- An Immortal T holder is also available to screw on to the top plate.
- You can print your own parts here.
Specifications
- Frame Material: Carbon Fiber
- Size: 5" Frame
Includes
- 1x 3D Printed GoPro Hero 8 Mount
- 1x Aluminum Heat Sink Plate
- 1x Extra Long Battery Strap
- 1x 3D Printed TPU Casing
- 1x Hardware Kit
- 1x Bottom Plate
- 4x 6mm Arms
- 1x Top Plate
Note: Camera, Battery, Floats, and Electronics NOT included.