The RCX 1306-2 2300KV Micro Outrunner Brushless Motor is specifically designed for micro sized multirotors and aircraft. This is small yet powerful little motor, capable of running off a 2s or 3s battery setup and designed to run 5" props.
Motor Specs
- Model: 1306-2 (also known as 1715-2)
- KV: 2300KV
- Configu Ration: 9N12P
- Weight: Approx. 13g
- Prop Shaft Diameter: 5mm (best suitable for 5mm prop, no adapter is required)
- Stator Diameter: 13mm
- Stator Length: 6mm
- Shaft Diameter: 2mm
- Motor Dimensions: Φ17.7×15mm
- ldle Current: 0.2A
- Internal Resistance: 62m
- Weight: Approx 12g (included bullet prop mount)
- Cable Length (3 Cables for ESC): Approx 12cm (will change to 15mm in the future)
- Suitable ESC: 10A
- Suitable Battery: 2-3S Li-Po Battery 7.4V - 11.1V (recommend 11.1V 3S Lipo for better performance)
Package Contents
- 1 x RCX 1306-2 2300KV Micro Outrunner Brushless Motor
- 1 x Prop nut
- 1 x Set of Screws
Note: We recommend using some sand paper on the bare motor wire leads to remove a coating on the wire. This makes the wire leads much easier to solder.