Orders ship from the U.S.

NerdCam3D Mk.2 Stereoscopic FPV Flight Camera
NerdCam3D Mk.2 Stereoscopic FPV Flight Camera
NerdCam3D Mk.2 Stereoscopic FPV Flight Camera
NerdCam3D Mk.2 Stereoscopic FPV Flight Camera

NerdCam3D Mk.2 Stereoscopic FPV Flight Camera

Regular price
Sold out
Sale price
Shipping calculated at checkout.

The NerdCam3D Mk.2 is the newest, most advanced and most versatile 3D-FPV flight camera in the class of analog video/standard definition 3D-cameras. This new and completely updated model comprises state-of-the-art automotive image sensors and advanced minimum-latency video processing features. It also includes a significant number of improvements over the previous Mk.1 model. The NerdCam3D Mk.2 addresses many suggestions and feature requests by the steadily growing community of 3D-FPV enthusiasts.

The scope of delivery includes the camera, a printed bilingual manual (English, German), a bag of replacement parts containing lens holder, lens lock-ring, special M1.8x6 screws for the mounting posts of the camera case and an optional plug for the DIP-switch aperture as well as two replacement pins for the micro switches.

Supported FPV Goggles:

Manufacturer Model 3D-Mode Notes
Zeiss Cinemizer
Cinemizer Plus
Cinemizer OLED
Squeezed Side-by-Side Full Supported
FatShark Dominator HD V1 Squeezed Side-by-Side Full Supported. Provisions for occasionally occurring left/right image swap of the goggle.
FatShark Dominator HD V2 Squeezed Side-by-Side Full Supported.
FatShark Dominator V3 Squeezed Side-by-Side Full Supported. Provides compensation feature for horizontal offset/misalignment design glitch of the goggle.
FatShark Attitude V3 Field-Sequential Full Supported. Use camera's image swap feature for left/right image if necessary.
HeadPlay HeadPlay Personal Cinema System Field-Sequential Full Supported with firmware 1.20w.
Different Manufacturers Cardboard-alike DIY goggles Cropped Side-by-Side Support depending on actual configuration. Contact The Missing Gear for details.

 Notice: The camera is fully compatible with the Dominator V3 goggle. It is however not a 16:9 aspect ratio camera. Hence the 3D-image inside the Dominator V3 goggle will be stretched horizontally form 4:3 to 16:9 aspect ratio.

Each NerdCam3D Mk.2 features a built-in stereoscopic on-screen display with commonly requested status information like battery voltage, amperage, RSSI, stopwatch as well as mAh charge counter. The new NerdCam3D Mk.2 is able to poll and read out telemetry data via MSP (MultiWii Serial Protocol) from any flight controller running Cleanflight, Baseflight or other related flight controller software adhering to the MSP standard. The legacy NerdSense Mk.1 sensing extension board remains supported for the sake of RC-cars. OSD-assisted camera calibration modes provide unprecedented ease of operation.


  • Dimensions: 100 x 26 x 28mm
  • Weight: about 35g
  • Power supply: +5 V DC
  • Power consumption: about 340mA
  • Sensor: CMOS (Electronic Rolling Shutter)
  • Sensor resolution: 640 x 480 pixels (VGA)
  • Dynamic Range: 70dB
  • Video Standard: PAL, NTSC
  • Video Output: 1x 3D CVBS, 2x CVBS
  • built-in infrared filter
  • Focal length: 2.2mm
  • Interpupillary distance (IPD): 64mm ("eye distance" between the two lenses)
  • Developed and manufactured by The Missing Gear


  • 1x Nerdcam3D FPV camera
  • German / English manual
  • 1x White protective case