The Lumenier CMOS-1200 is a high quality FPV camera with a native 16:9 widescreen aspect ratio. The 1200tvl gives the picture extreme detail allowing you to see more clearly with higher resolution. This Lumenier camera does exceedingly well balancing the picture with its WDR (Wide Dynamic Range) function with no added delay. The native 16:9 widescreen picture pairs beautifully with widescreen monitors or FPV goggles like the Dominator V3 and Skyzone 40ch headset which have widescreen displays.
The camera comes in a small, aerodynamic enclosure that is only 26x26mm weighing 12 grams. The CMOS-1200 comes with a plug and play locking cable making setup a breeze with most video transmitters. (no soldering needed)
The camera is small and compact but also full of features, giving you the best of both size and performance! This camera works well with Lumenier, Fat Shark and ImmersionRC transmitters which power cameras at 5v.
Features
- 1200TVL
- PAL/NTSC selectable via OSD menu (PAL is default)
- 2.8mm(default) 2.1mm / 3.6mm / 4mm Lens
- Accepts 5-22v input power
- 1/2.9 Inch sensor
- 1.3 Mega Pixel
- CVBS 16:9 widescreen aspect ratio
- Auto color to black function
- Overvoltage protection
- Super WDR
- Low illumination: 0.1lux
- Power OSD menu for camera settings
Specifications
Image Sensor | 1/2.9” CMOS |
Output Resolution | 1200TVL |
Camera system | PAL/NTSC |
Total Pixels | 1280(H)×960(V) |
Min. Illumination | Color: 0. 05Lux(F1.2,50IRE,AGC ON); BW: 0.001Lux(F1.2,50IRE,AGC ON) |
Shutter Speed (CCD IRIS) | PAL :1/50 ~ 1/100,000s NTSC:1/60 ~ 1/100,000s |
2D-DNR | 0-100 |
3D-DNR | 0-100 |
SENSE-UP | Supported |
Image Adjustment | Supported |
BLC/HLC | Supported |
WDR | In built |
S/N | > 50dB |
White Balance | Auto |
Day / Night Shift | Auto/ External control/ Color/ B&W |
Private shading | Support |
Lanuage | English |
Video Out | 1.0Vp-p,75Ω |
Input Power | 4.5V-24V |
Working Temperature | -20?~60? |
Working Humidity | Relative humidity < 90% |
Dimension | 26mm*26mm |
Includes
- 1x Lumenier CMOS-1200 16:9 26x26mm camera
- 1x Mounting bracket and screw set
- 1x FPV plug and play cable
- 1x OSD menu cable
For a plug and play setup we suggest pairing this camera with the Lumenier TX5G series of video transmitters. (TX5G25, TX5G2R, TX5G6R, TX5gPro 25mw, TX5gPro 200mw, TX5gPro 600mw) This camera cable will simplify the connection between the Lumenier VTX and the camera by only needing 1 cable.
NOTE - not compatible with all OSD's - check for compatibility before mounting and cutting wires.