Orders ship from the U.S.

ImmersionRC Ghost Zepto 2.4GHz Receiver
Sold out
$31.99
Shipping calculated at checkout.

The ImmersionRC Ghost Zepto is a small and lightweight 2.4GHz receiver that is perfectly suited for the ImmersionRC Ghost and Tramp Nano. Comes with an Over-the-air (OTA) upgradeable firmware, SBus, SBus-Fast (200k), SRXL-2 (400k), GHST, SBus Inverted serial formats, and other specs!

\r\n

Specifications

\r\n
    \r\n
  • Frequency Range: 2406 - 2479MHz
    • \r\n
  • Modulation: Chirp Spread Spectrum + Adaptive FHSS
    • \r\n
  • Binding: Bidirectional with confirmation and protocol negotiation
    • \r\n
  • RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come
    • \r\n
  • Downlink RF Power: +13dBm
    • \r\n
  • Sensitivity: -117dBm in Long Range mode
    • \r\n
  • Serial Formats: SBus, SBus-Fast (200k), SRXL-2 (400k), GHST, SBus Inverted
    • \r\n
  • Firmware: Over-the-air (OTA) upgradable
    • \r\n
  • Power Supply: 5V recommended, as low as 3.6V tolerated, no more than 5.5V
    • \r\n
  • vTx Control: Tramp control from ‘T’ pin on Rx, regardless of the selected serial format
    • \r\n
  • Antenna Connector: Standard MHF4 (vs. Atto which uses the larger U.FL)
    • \r\n
  • Dimensions: 10.0mm x 10.0mm, 0.38g (w/o antenna)
    • \r\n
  • Rx Noise Floor Analysis: Auto on power-up, or on-demand from the T
    • \r\n
  • Dimensions: 10mm x 10mm, 0.35g (w/o antenna)
    • \r\n
\r\n

Includes

\r\n
    \r\n
  • 1 x ImmersionRC Ghost Zepto 2.4GHz Receiver
    • \r\n
  • 1 x Micro qTee Antenna w/50mm cable
    • \r\n
  • Silicone Cables
    • \r\n
  • Heat Shrink
    • \r\n