Orders ship from the U.S.
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC

GEPRC STABLE F411 16x16 VTX Stack - F411 Flight Controller + 12A BLheli_S 4-in-1 ESC
Sold out
$49.99
Shipping calculated at checkout.

The GEPRC STABLE F411 micro tower electronic system is one of the best electronic system solutions for micro quads on the market!

STABLE F411 is equipped with F411 FC, 4-in-1 BLS 12A ESC, and 5.8G PIT/25/100/200mW. It supports 2-4S batteries, which could meet all kinds of demand.  With the three-layer structure design and a completely optimized pad structure, wiring is simpler than ever.

STABLE F411 adopts 16x16mm mounting holes and pin-type modular design. Supporting IRC TRAMP protocol, you can directly adjust VTX frequency and flight control parameters in the OSD interface. With LED interface you can program your LED strip with Betaflight Ground Station. Moreover, you can clearly see aircraft’s voltage, current, battery usage and other information with integrated OSD chip.

STABLE F411 is equipped with a 200mW VTX, which can easily cope with various flight environments. Featuring a build-in PIT mode (low power mode) makes it convenient for competition use. A professional 5.8G rod antenna is equipped to achieve an ideal transmission effect. Nonetheless, your VTX will not affect others when adjusting the frequency. 

STABLE F411 supports a variety of receivers including Sbus, PPM, CRSF, DSMX, iBus protocols, which can be used with your remote control.

Specifications

  • MCU: STM32F411
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • Continuous current: 12A
  • Input voltage : 2-4S LIPO
  • Power : PIT/25/100/200mW
  • Integrated LC Filter
  • Mounting holes: 16mm*16mm
  • Support:Sbus,PPM,CRSF,DSMX,iBus

STABLE F411 Flight Controller(16*16mm)

  • MCU: STM32F411
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BEC Output: 5V@2A
  • Size: 21mm*21mm
  • Mounting holes: 16mm*16mm
  • Integrated LC Filter
  • Input voltage 2-4S LIPO
  • Firmware target: MATEKF411
  • Weight: 2.5g

STABLE F411 BLheli_S 4IN1 12A ESC(16*16mm)

  • MCU: BB21F16G
  • Continuous current: 12A
  • Input voltage : 2-4S LIPO
  • ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
  • Size: 23mm*21mm
  • Mounting hole: 16*16mm
  • Firmware target: Blheli_S G_H_30
  • Current meter: 210
  • Weight: 2.7g

STABLE F411 VTX 5.8G 200mW(16*16mm)

  • Power : PIT/25/100/200mW
  • Antenna interface : IPEX (UFL)
  • Telemetry: IRC Tramp
  • Size: 17mm*27mm
  • Mounting holes: 16*16mm
  • Integrated LC Filter
  • Weight: 1.6g

Manual

Includes

  • 1 x STABLE F411 Flight controller
  • 1 x STABLE F411 BLheli_S 4IN1 12A ESC
  • 1 x STABLE F411 VTX 5.8G 200mW
  • 1 x 5.8G Antenna
  • 1 x XT30 Cable