
The SPAN F722 VTX FC Stack by GEPRC comes with a F722 DUAL GYRO ICM20689 Flight Controller, 5.8GHz 600W VTX, and BL32 50A 4-in-1 ESC. The FC supports a variety of receivers including Sbus, PPM, CRSF, DSMX and iBus protocols, which can be used with your remote control. Powerful stack all in one!
Specifications
F722 DUAL ICM20689 Flight Controller
MCU: STM32F722RET6
IMU: 2x ICM20689(SPI)
BlackBox: 32Mb onboard Flash
OSD: BetaFlight OSD w/ AT7456E chip
Baro:NO
BEC Output: 5V@2A
Integrated LC Filter
Firmware target: EXF722DUAL
Size: 36x36mm board, φ4mm with Grommets φ3mm
Power input: 3-6S LiPo
5.8G 600mW VTX
Channel: 48
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 600mW
Connector type: MMCX Connector
Traditional button
IRC Tramp protocol
BL32 50A ESC 4-in-1
MCU: STM32FO51K86(32bit 48mHz)
Continuous Current: 50A
Peak Current: 55A (5S)
Current sensor: YES
Telemetry:Supported
Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
Firmware Version:GEPRC-BL32-4IN1
Input Voltage: 3-6S Lipo
BLHeliSuite download
Manual
Includes
1 x FC & VTX board
1 x 50A ESC board
1 x MMCX Antenna Extension Cord Wire
1 x 5.8G Antenna
1 x 8pin cable
4 x 4pins JST-SH sockets
1 x 35v 220uf Capacitor
1 x XT60 Power cable
12 x Silicon grommets M4 to M3
4 x M3*25 YFS screw
4 x M3*30 YFS screw
8 x M3 Nylon nut