Looking for a feature-packed and versatile system with the freedom of 16 channels? You can stop looking because the 16SZ is it.
Not only is the 16SZ compatible with FASSTest, FASST, T-FHSS and S-FHSS protocols, but it also includes a large 4.3” LCD color touchscreen, full telemetry and an R7008SB S.Bus2 high-voltage receiver, too
Features
- 16 proportional channels, 2 switched
- Compatible with
- FASSTest, FASST, S-FHSS and T-FHSS protocols
- Futaba HV (High-Voltage) receivers
- All Futaba telemetry sensors
- Free online software upgrades
- 4.3" LCD touchscreen
- 30-model memory
- 15-character user and model naming
- Sub trims (240 steps)
- Servo reversing
- Trim settings (adjustable step, rate & mode)
- Servo speed adjustment
- AFR/DR
- AFR curve mode (3)
- AFR curve point (17 points)
- Idle down
- Logic switch
- Full flight condition
- 10 programmable mixes
- Throttle cut
- S.Bus servo programming editor
- High-voltage R7008SB receiver
- Swash and throttle mixing
- V-tail mixing
- Endpoint adjustment
- Adjustable servo speed
- 8 flight conditions
- 3-axis gyro support
- Micro memory card slot
- Voice message/audio earphone jack
- Up/down integral timer (2)
- Throttle timer
- Lap timer/memory
- Battery fail safe
- Stick calibration
- Eight toggle switches
- Two assignable front dials
- Four assignable trim levers
- Two assignable side levers
- 6.0V NiMH rechargeable battery
- Trainer S.Bus port
- Vibration alert
- 180° antenna rotation and 90° angle adjustment
- Multi-language (9 languages)
R7008SB Receiver Features
- Bidirectional communication for telemetry through the S.Bus2 port
- S.Bus technology: serial bussing multiple servos for cleaner installations
- 8-channel PWM output ports for standard configurations
- Dual Antenna Diversity (DAD) maximizes signal reception
- High Voltage
- External voltage port
- Battery fail safe
- Channel mode allocations for dual receiver set-ups
- Power Requirement: 3-7-7.4V (voltage range: 3.5-8.4V)
- Extra Voltage Port: 0-70V DC
- Receiver Dimensions: 0.98 x 1.9 x 0.56"; (24.9 x 47.3 x 14.3 mm)
- Receiver Weight: 0.38 oz (10.9 g)
Specifications
Transmitter
- Transmitting Frequency: 2.4GHz band
- System: FASSTest18CH, FASSTest12CH, FASST MULT, FASST 7CH, T-FHSS,
- S-FHSS, switchable
- Power supply: 6.0V HT5F1800B NiMH battery
- RF power output: 100mW EIRP
- Mode 2
Receiver
- Receiving Frequency: 2.4GHz FASSTest system
- Power Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
- Current drain: 75mA
- External voltage Port: 0 - 70V DC
- Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
- Weight: 0.38oz (10.9g)
- Antenna Length: 5-3/4" (146mm)
Includes
- Futaba T16SZA 16ch Transmitter Radio (FUTK9460)
- Futaba R7008SB Receiver
- Printed manual
- HT5F1700B 6V Ni-Mh Battery