BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drones. Transfer all of your older micro batteries to the new BT2.0 connector!
Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of BT2.0 connector on 1S whoop drone. So we started our long-term investigation on the design of the 1.0mm banana connector and the stable manufacturing technique to meet pilots' demand. Betafpv always keeps moving forward with a passion for breakthrough experiences.
- BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to the banana connector and increasing the cross-sectional area of the banana connector.
- With these connectors, it can support 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current.
- By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
- Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. You can get 2mins flight time in full throttle on Meteor65 if you use our BT2.0 300mah 1S Battery.
- Size: Male Connector - 6.0*4.2*10.5mm / Female Connector - 6.0*4.2*8.3mm
- Weight: Male Connector- 0.34g/PCS / Female Connector - 0.24g/PCS
- Note: The terminal molded case identifies the positive and negative poles, and must be welded according to the instructions.
- 5 * BT 2.0 Female Connector
- 5 * BT 2.0 Male Connector