AstroX has given the tried and true AstroX X5 frame their signature “silky touch” - a special coating that gives the carbon fiber a unique feel!
The design itself is based on the 3:4:5 geometry, which has proven to be very successful for freestyle frames. A vertical plate has been added near the rear of the frame, allowing you to easily and cleanly mount the receiver and/or video transmitter in a convenient location. The front of the top plate has slots to allow for various HD camera mounts, and the FPV camera mount is easily compatible with most cameras currently on the market. A custom AstroX V2 PDB is included, as well as an XT-60 connector, a buzzer and a special mount to fix the battery connector to the top plate for easy access.
The structural design is similar to the Alien, in that the replaceable arms are firmly supported between the bottom plate and a cross brace. This ensures superior rigidity and crash resistance even in tough conditions. The screws that hold the arms in place are fastened with steel press-fit nuts, making arm replacements a breeze!
The design of the Korean frame has been carefully tweaked to maintain its visual appeal without sacrificing performance. All of the high-quality carbon fiber has been chamfered, sanded and clear coated. This extensive procedure makes the AstroX “Silky” version stand out in a sea of carbon fiber frames! And not only that but designer Boohwan Jeon opted for anodized aluminum standoffs in the signature AstroX Blue color!
- Shared platform - All parts can share with AstroX210(AXF210)
- Full 3K AstroX Carbon Fiber with Silky coated airframe
- 2mm bottom and top plate and 4mm removable arms
- 1.5mm X-reinforce plate and 8pcs of insert nut make more durable and quick swapping of arms.
- Black Nickel plating 12.9 grade carbon steel screws
- Easy grip and lightweight hollow stand-off (Hard anodized: Astro blue color)
- Easy damper landing gear
- AstroX V2 PDB include (5V for FC and RX(Camera), 12V for VTX and Camera, Aux Power(same as battery volts) our and ESC Signals)
- New 2 holes Cam mount(Support for 26mm cams) with 5V buzzer hole (include 5V buzzer)
- Easy Lipo Access (suggested Lipo is a 1300mah - 1600mah 4s)
- Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session)
- 210 mm diagonal motor distance
- Dry weight: 117 grams
- 4x 4mm round cut finish Arms
- 1x 2mm top plate
- 1x 2mm Bottom Plate
- 2x 1.5mm Cam mount
- 1x 1.5mm VTX mount
- 1x 1.5mm RX carrier
- 1x 1.5mm X-reinforce plate
- 8x Astro blue Standoff
- 8x insert nut 8pcs
- 1x Set of black Nickel plating 12.9 grade carbon steel screws
- 1x Set of Nylon Standoff and nut.
- 1x AstroX V2 PDB
- 2x 4pin Signal pins
- 1x Black XT-60
- 1x 14AWG power cable(red, black)
- 1x XT-60 mount plate
- 1x 5V buzzer
- 2x AstroX lipo strap
- 1x AstroX logo sticker
- 1x 2mm Lipo Pad
* motor, camera and distribution board is not included in the package