The APD F-Series ESCs bring forward a ground-breaking new design utilizing a Powerful 32bit F3 running brand-new firmware developed from the ground up.
The F3 processor ensures no input commands are missed, even at the highest input update rates. Its bleeding-edge features include ‘PWM-frequency dithering, and Active Phase-current Demagnetisation to ensure the smoothest control at high power, whilst maintaining maximum efficiency.
Compatible with the latest Protocols including ProShot up to 3MBs/S.
With peak power ratings up to 18kW, these ESCs will have no trouble powering your craft.
Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability.
Plug and play firmware
True 10bit resolution
Virtually no setup time, with simple motor reverse solder tab
Auto-detect PWM – Standard 1-2mS, up to 500Hz
Auto-detect Multishot – Up to 32Khz
Auto-detect ProShot or Dshot any frequency range
ProShot1000 to ProShot3000 capable (1-3Mbs/s)
Dshot300 to Dshot2400 capable (0.3-2.4Mbs/s)
Up to 750,000 eRPM
Auto Timing Advance
HBM (Hectic Boost Mode) ensures this will deliver maximum thrust, outperforming any other ESC
Intelligent current sensing
Digital commands over Proshot (including anti-turtle mode)
Digital commands over Dshot
8-Layer PCB to ensure minimal track resistance
Cells: Up to 14S
Continuous Current: 200A
Burst Current: 300A
Dimensions 73 × 34 × 20 mm
* Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 60 seconds with 33 m/s airflow.
Documentation and Datasheets can be found at: docs.powerdrives.net